Hydraulic Chair (FT-J166-B) Red Mesh costs ৳7,748 in Bangladesh. It is in stock and ships cash on delivery nationwide from Shampoo BD. It was previously ৳8,414.
How can you spot a genuine imported Hydraulic Chair from Furnitex against a refurbished or rebranded copy?
When your Hydraulic Chair (FT-J166-B) arrives from Furnitex, the original Chinese import will carry consistent factory markings on the metal base and seat underside that match the model number printed on your invoice and packaging label. Counterfeit or locally refilled versions often show mismatched stamping, faded logos, or replacement base components that don't align with Furnitex's standard assembly process, so inspect the base bolts closely and confirm the serial number matches your receipt before you sit down for the first time. The mesh backing should feel uniformly woven with no loose threads or patching, and the red dye should be even across the entire backrest without discoloration patches that suggest respraying or old stock being repackaged.
You should also check that all factory seals on the hydraulic cylinder remain intact and unbroken, as refurbished chairs often hide wear by replacing seals, which can fail within weeks of purchase and leave you stranded with a sinking seat that cannot hold height. The armrest attachment points should show no previous drilling marks or paint overspray, and when you pump the height lever three times, the seat should rise and fall smoothly without stuttering, grinding sounds, or hissing that indicates a worn cylinder from prior use.
What is the correct way to set up and adjust this chair when it first arrives at your workplace or home?
Before sitting, place the chair on a flat, hard floor and attach the five-point metal base by aligning the seat pan with the base connector and securing all bolts finger-tight, then use a wrench to tighten each bolt in a cross pattern so the base sits level without wobbling or tilting to one side. Clip both armrests onto their mounting brackets until they click into place, and verify that the casters roll freely in all directions without resistance, as a stuck caster can strain your lower back when you pivot.
Once assembly is complete, adjust your seat height by sitting and using the lever underneath the seat to raise or lower the pan until your feet rest flat on the ground and your knees bend at roughly ninety degrees, then test the tilt lock by leaning back gently and confirming that the backrest angle holds steady without drifting forward or backward during your work session. A first-time user should expect the seat to feel firmer than an armchair because the mesh provides minimal cushioning and prioritizes airflow, so you may want to add a small cushion during your first week if you sit for longer than four hours continuously.
How often should you perform maintenance checks to keep the chair functioning safely for years?
Every two weeks, wipe the red mesh with a dry, soft-bristled brush to remove dust and prevent buildup that can block airflow and make the seat feel hotter during long workdays, and if you notice any stains from coffee spills or sweat marks, use a cloth dampened with cool water and a tiny drop of mild dish soap, then allow the mesh to air dry completely before sitting again. Monthly, walk around the chair and gently tug on each armrest and the backrest frame to confirm that no bolts have loosened from vibration or movement, and if you hear a rattle, locate the loose bolt and tighten it with a wrench without over-tightening, which can crack the mesh backing or strip the bolt threads.
Every three months, inspect the casters for any visible cracks, flat spots, or stuck debris that prevents smooth rolling, and if a caster shows damage, it can be replaced individually without removing the entire base, saving you time and expense. The hydraulic cylinder itself requires no lubrication and should not be opened or tampered with, so if you notice the seat sinking faster than normal over many months or if the height lever becomes stiff, contact Furnitex customer service rather than attempting internal repairs that could void any remaining coverage.
What should you expect in terms of comfort and support during your first week of use?
Your first few days sitting in this chair will feel noticeably different from a padded executive model because the mesh seat pan has only a thin foam layer underneath, so you will feel the contoured shape of the seat more directly against your body, which is intentional design for breathability rather than luxury feel. The red mesh back does not conform to your spine like memory foam because it is woven polyester stretched over a rigid support frame, meaning your back will not sink into the chair but will rest against a stable, supportive surface that encourages upright posture and reduces slouching during work.
By the second week, your body adjusts to the firm support and you will notice that sweat buildup and heat around your back and legs decreases compared to chairs with solid upholstery, especially in Dhaka's warm and humid climate where mesh chairs outperform sealed backs by a significant margin. The tilt mechanism allows you to lean back up to fifteen degrees without toppling, giving you a brief reprieve for your lower back during breaks, and the fixed armrests position your elbows at a natural height if your desk is set correctly, reducing shoulder strain that accumulates from typing.
Which types of work environments and user body types does this chair serve best?
The Hydraulic Chair (FT-J166-B) is engineered for professionals who spend six to eight hours daily in seated positions such as customer service representatives, data entry clerks, graphic designers, and office administrators who need reliable support without the bulk of a full-size executive model that occupies valuable floor space. Adults ranging from approximately forty-three centimeters at minimum height to fifty-three centimeters at maximum height adjustment will find the seat pan and backrest proportioned correctly, which covers most standard adult body frames, though very tall users above one hundred eighty-five centimeters may find the backrest height slightly compact for full lumbar contact.
This chair excels in call centres, NGO offices, small startup environments, university computer labs, and home workstations where budget constraints demand practical seating solutions without compromise on basic ergonomic support and durability. The red mesh finish complements modern, minimalist decor and works equally well in creative studios, training rooms, and reception areas where the chair's appearance contributes to the professional atmosphere, and because the mesh breathes exceptionally well, it remains the top choice for any workspace in Bangladesh where air conditioning is limited or variable.
What coverage does Furnitex provide with this import, and how do shipping costs affect the final price you see listed?
The price displayed on this product page reflects the base cost of your Hydraulic Chair as imported by Furnitex from China, and any delivery charge is calculated separately based on your address and chosen courier method, so review the shipping fee clearly shown during checkout before finalizing your order to understand your complete spending. Standard nationwide delivery operates through established courier partners who handle office furniture, and the timeframe for arrival depends on whether your location is within Dhaka metropolitan areas or requires outstation transport, which information your order confirmation will specify once payment is processed.
Furnitex stands behind the structural integrity and mechanical function of the chair you receive, meaning the hydraulic cylinder, base welds, and mesh attachment should perform without defects from the moment it arrives, and if you identify factory faults within the specified warranty window, contact Furnitex with your invoice number and photographs so they can advise you on replacement or repair options. Regular wear from use, accidental damage from mishandling, and damage caused by incorrect assembly are not covered under normal warranty terms, so follow the setup instructions precisely and treat the chair with reasonable care to maintain your protection and ensure years of reliable service.
- Imported Chinese hydraulic office chair with smooth gas lift height adjustment from 43 cm to 53 cm
- Red mesh backrest with breathable polyester design, ideal for warm and humid work environments
- Fixed armrests and five-point metal base with smooth-rolling casters for workplace stability
- Tilt lock mechanism allows lean-back positioning up to 15 degrees for working comfort
- Minimal assembly required; factory-tightened bolts and fasteners for immediate use
বাংলা
Add to Cart 
