Hydraulic Chair (FT-J166-B) Blue Mesh costs ৳7,748 in Bangladesh. It is in stock and ships cash on delivery nationwide from Shampoo BD. It was previously ৳8,414.
How Can You Verify This Chair Is Genuinely Imported and Not Refurbished?
When you receive a Hydraulic Chair FT-J166-B in blue mesh from Furnitex, the first thing to examine is the packaging condition and factory sealing, which should show no signs of previous opening, tape repairs, or water damage that might indicate the box has been handled through multiple resales or repackaging cycles. Look closely at the cylinder beneath the seat—genuine imported units arrive with the hydraulic fluid intact and the piston rod showing a protective coating of light machine oil, whereas chairs that have been drained, refilled, or relabelled often display discoloration, rust spots, or sticky residue around the cylinder head that suggests poor storage or mixing of old and new components.
The mesh backing fabric on an authentic Furnitex import will have uniform weave density, consistent color throughout without fading patches, and a manufacturer's label stitched or heat-sealed into the base or back panel, complete with batch codes and country-of-origin marking printed clearly in English and Chinese characters; counterfeit or refurbished versions frequently show loose stitching, bleached or darkened sections where sun or moisture exposure occurred, or labels that appear peeling, reprinted, or applied with adhesive rather than permanently affixed during manufacturing.
What Should You Expect When You First Set Up and Sit in This Chair?
Your new blue mesh chair will arrive in a flat-packed state with the base, pneumatic cylinder, seat pan, and backrest as separate components, requiring you to insert the cylinder into the base column and then slot the backrest upright support into its designated bracket on the upper frame, a process that takes most users between eight and fifteen minutes with no specialized tools beyond an adjustable wrench for final tightening. When you first lower yourself into the seat, you will feel the mesh backing flex slightly backward, a normal response to the supporting structure's intended design, and the mesh fabric may release a faint odor of manufacturing chemicals that will dissipate fully within forty-eight hours of normal air exposure in your workspace.
The hydraulic lever positioned beneath the seat will require moderate finger pressure to activate—neither stiff nor loose—and when you press downward, the chair height will lower in one smooth, continuous motion without jerking, grinding sounds, or sudden drops, which signals that the cylinder seal is functioning correctly and the fluid pressure is properly balanced throughout the internal chambers; releasing the lever immediately locks your chosen height into place, allowing you to sit without the seat drifting downward during your work.
How Often Should You Adjust the Height, and What Adjustment Range Can You Expect?
You should evaluate your preferred seat height each time you sit down for the first week of ownership, as your body's perception of comfort adjusts to the mesh backing's support characteristics and the padding beneath the seat surface, and you will likely find that your optimal height places your elbows at approximately ninety degrees when your feet rest flat on the floor or a footrest positioned directly beneath your desk surface. The adjustment range on this model accommodates users from approximately five feet two inches through six feet in height, covering the vast majority of people working in Bangladeshi offices, homes, and startup environments, though individuals at either extreme of this range may need to pair the chair with a footrest or desk height adjustment to achieve perfectly neutral spine alignment.
You need not readjust the height during a single work session unless you are moving between different desk configurations, as the hydraulic lock mechanism maintains your chosen position throughout eight to ten hours of continuous sitting without gradual descent or unexpected shifts; however, after six to twelve months of regular use, some users report that their chosen height requires a quarter-turn adjustment upward to compensate for minimal settling of internal components, which is entirely normal and requires only a moment of lever pressure to correct.
What Materials Make Up This Chair, and How Durable Are They in Bangladesh's Climate?
The structural frame is constructed from welded steel tubing, the seat pan and backrest panels are engineered from medium-density fiberboard or plywood with polyurethane foam padding applied in a two-to-three-centimeter layer, and the blue mesh covering is a synthetic polyester or polypropylene weave specifically chosen because it resists moisture absorption, mildew formation, and color fading when exposed to humidity and temperature fluctuations common in Dhaka, Chittagong, and other Bangladeshi cities where ambient moisture levels remain elevated throughout much of the year. The hydraulic cylinder itself is a sealed industrial-grade unit filled with mineral oil formulated to maintain consistent viscosity across the temperature range from fifteen degrees Celsius to forty-five degrees Celsius, which means it will perform reliably whether your office uses air conditioning year-round or operates with natural ventilation during cooler seasons.
The five-pointed base sits on plastic or rubber casters that roll smoothly across hard flooring and low-pile carpets without catching or binding, though very high carpet pile may slightly increase rolling resistance; over three to four years of normal office use—where normal means eight hours daily sitting, occasional repositioning, and standard cleaning—the mesh may show very minor pilling or surface wear, the padding may compress slightly at the contact points with your thighs and lower back, and the hydraulic cylinder will eventually lose a small percentage of its lift force as internal seals gradually relax, at which point replacement cylinders remain inexpensive and widely available throughout Bangladesh.
What Cleaning and Care Will Keep This Chair in Good Condition?
The blue mesh backing and seat surface should be vacuumed weekly using the upholstery attachment to remove dust, skin cells, and lint that accumulate in the weave fibers, and you should use a slightly damp microfiber cloth to wipe the mesh gently every two weeks, allowing the fabric to air-dry completely before you resume sitting, as excess moisture trapped within the synthetic fibers can eventually lead to mold or mildew growth in humid environments. The steel frame and cylinder can be wiped with a dry cloth to remove dust, and you should avoid spraying water or liquid cleaners directly onto the cylinder or the lever mechanism, instead applying cleaner only to the cloth and then wiping the metal components, as liquid entering the cylinder can compromise the internal seal and reduce lift performance over time.
The casters can be cleaned by rolling the chair over a slightly damp cloth or using a brush to dislodge hair and debris from the wheel mechanism, and if any caster becomes stuck or difficult to turn, a small drop of light machine oil applied to the wheel axle will restore smooth rolling without leaving visible residue on your flooring; harsh chemical cleaners, bleach-based products, and abrasive scrubbing are not necessary and should be avoided, as the synthetic mesh is durable but not designed to withstand aggressive treatment.
Who Should Avoid This Particular Chair Model, and What Alternatives Might Suit Them Better?
Users who require specialized ergonomic features such as lumbar support cushions, adjustable armrests, or tilt-recline mechanisms will find that this model's simple fixed-back design does not provide those options, and they should instead inquire about higher-specification chairs that incorporate memory foam, adjustable backrests, and multi-functional controls, as the FT-J166-B is intentionally engineered as a straightforward, affordable solution for general office work rather than a premium ergonomic system. Individuals weighing significantly above one hundred thirty kilograms or those with existing spinal conditions requiring specialized medical-grade support should consult with a healthcare professional regarding chair selection before purchasing, as this model's standard padding and hydraulic system are rated for typical office use rather than therapeutic or bariatric applications.
People working in high-dust environments, manufacturing facilities, or settings with airborne particles or chemical fumes may find that the mesh backing allows excessive air circulation of these contaminants, whereas models with solid plastic or partially enclosed backs would provide better isolation; similarly, users in extremely cold, unheated spaces should note that synthetic mesh offers less insulation than fabric-covered backs, though this is rarely a concern in Bangladesh's climate, and anyone requiring a chair height below forty-five centimeters from the floor, as needed for very low desks or specialized applications, will find that this model's minimum height does not descend sufficiently.
- Hydraulic height adjustment lever beneath seat operates smoothly with moderate finger pressure for users from 5'2" to 6 feet tall
- Blue synthetic mesh backing resists moisture absorption and mildew in Bangladesh's humid climate while maintaining consistent weave and color
- Welded steel frame and industrial-grade sealed hydraulic cylinder rated for eight to ten hours of daily office use over three to four years
- Arrives flat-packed requiring fifteen minutes assembly of base, cylinder, seat pan, and backrest without special tools
- Polyurethane foam padding beneath seat and mesh surface provides mid-level comfort suitable for standard office work without luxury features
English
অ্যাড কার্ট 
